Isoflex IFV90-24S Engine Mount for Cummins, Caterpillar & Yanmar Marine Engines
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size 1" (M24)
- 5" mounting center (127mm)
- Minimum free height 3.94" (100mm)
- Replaces factory mounts for Cummins, Caterpillar, Yanmar
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Hold-down bolt slots can be rotated to any direction for easier installation
- Fail safe
Replaces Isoflex M90-24S mount.
Supported Engine Models
Caterpillar: 3116-TA, 3126B-TA, C7, C7-ACERT, C7.1, C9, C9-ACERTCummins: 350C, 444C, 450C, 6C8.3M, 6CTA8.3M (480C-E), 6CTA8.3M1, 6CTA8.3M1(300C), 6CTA8.3M2, DIAMOND 315, DIAMOND 420, QSB6.7, QSC8.3, QSM11
Yanmar: 6LP-DTE, 6LP-STE, 6LPA - DTZP, 6LPA-DTP, 6LPA-STP
Download IFV90-24S Data Sheet
Download Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 50 - 350 | 110 - 770 |
| Base Foot Print (LxW) | 177 x 100 | 6.97 x 3.94 |
| Base Bolt Centers (C) | 127 | 5.00 |
| Base Bolt Diameter (D) | 12 | 1/2 |
| Base Thickness (T) | 25 | 0.98 |
| Stud Diameter (S) | 24 | M24 (1" approx) |
| Min Free Height (J) | 100 | 3.94 |
| Overall Height (H) | 200 | 7.87 |
| Weight | 2.3 | 5.1 |
