Isoflex IFV90-20S Engine Mount for John Deere and Other Marine Engines

Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.

• Stud size 3/4" (M20)
• 5" mounting center (127mm)
• Minimum free height 3.94" (100mm)
• Replaces factory mounts for John Deere, Fiat-Iveco, Doosan, Gardner, MAN, Perkins Sabre, Yanmar, AGCO SISU
• Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
• Encapsulated core allows for fine tuning of inverted stiffness
• Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
• Hold-down bolt slots can be rotated to any direction for easier installation
• Fail safe

Replaces Isoflex M90-20S mount.

Supported Engine Models

AGCO SISU: 74CTIM, 84CTIM

Caterpillar: 3208-NA, 3208-T, 3208-TA, 3304-NA, 3304-T, 3304B-NA, 3304B-T, 3306B-T, 3306B-TA

Doosan: L136, L136T, L136TI, LO86TI

Fiat-Iveco: 8361 SM21, 8361 SRM32, 8361 SRM38, 8361 SRM40, CURSOR 12

Gardner: 8LXB

John Deere: 4039DFM M1, 4039DFM M2, 4045AFM85 M5, 4045DFM50 or 70 M2, 4045SFM85 M4, 4045SFM85 M5, 4045TFM M1, 4045TFM M2, 4045TFM M3, 4045TFM M4, 6068AFM75 M1, 6068AFM75 M2, 6068AFM75 M3, 6068AFM75 M4, 6068DFM M1, 6068DFM M2, 6068SFM50 M3, 6068SFM50 M4, 6068SFM50 M5, 6068SFM75 M1, 6068SFM75 M2, 6068SFM75 M3, 6068SFM75 M4, 6068SFM75 M5, 6068TFM M4, 6068TFM75 M1, 6068TFM75 M2, 6068TFM75 M3, 6068TFM75 M4, 6081AFM75 M1, 6081AFM75 M2, 6081AFM75 M3, 6081AFM75 M4

MAN: D 0826 L, D 2866, D 2866 LX, D 2866 T, D2866LXE40

Perkins: TV8.540

Yanmar: 4LHA-HTP, 4LHA-STP, 6HYM-WGT

Download IFV90-20S Data Sheet

Download Data Sheet