Isoflex IFV75-16S Engine Mount for Ford Lehman, Diecon Marine Engines
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size 5/8" (M16)
- 5" mounting center (127mm)
- Minimum free height 2.91" (74mm)
- Replaces factory mounts for Ford Lehman, Diecon
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Hold-down bolt slots can be rotated to any direction for easier installation
- Fail safe
Replaces Isoflex M75-16S mount.
Supported Engine Models
Diecon: 40N15, 50N15Ford Lehman: 4D254, 4D50, 4D61, 6D363T, 6D380
Download IFV75-16S Data Sheet
Download Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 75 - 300 | 165 - 660 |
| Base Foot Print (LxW) | 177 x 100 | 6.97 x 3.94 |
| Base Bolt Centers (C) | 127 | 5.00 |
| Base Bolt Diameter (D) | 12 | 1/2 |
| Base Thickness (T) | 20 | 0.79 |
| Stud Diameter (S) | 16 | M16 (5/8" approx) |
| Min Free Height (J) | 74 | 2.91 |
| Overall Height (H) | 132 | 5.20 |
| Weight | 1.1 | 2.4 |
