Isoflex IFV139XHD-24S Engine Mount
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size 1" (M24)
- 7.28" x 2.56" mounting center (185mm x 65mm)
- Minimum free height 5.28" (134mm)
- Replaces factory mounts for Cummins, Yanmar
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Hold-down bolt slots can be rotated to any direction for easier installation
- Fail safe
Supported Engine Models
Cummins: QSK19 - MYanmar: 6AY-ETE
Download IFV139XHD-24S Data Sheet
Download Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 600 - 1200 | 1320 - 2640 |
| Base Foot Print (LxW) | 240 x 140 | 9.45 x 5.51 |
| Base Bolt Centers (C) | 185 x 65 | 7.28 x 2.56 |
| Base Bolt Diameter (D) | 16 | 5/8 |
| Base Thickness (T) | 30 | 1.18 |
| Stud Diameter (S) | 24 | M24 (1" approx) |
| Min Free Height (J) | 134 | 5.28 |
| Overall Height (H) | 215 | 8.46 |
| Weight | 4.3 | 8.5 |
