Isoflex IFV136XHD-24S Engine Mount for Perkins-Sabre, Cummins & Other Marine Engines
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size 1" (M24)
- 7.17" mounting center (182mm)
- Minimum free height 5.28" (134mm)
- Replaces factory mounts for Perkins-Sabre, Cummins, Fiat-Iveco, MAN, MTU
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Hold-down bolt slots can be rotated to any direction for easier installation
- Fail safe
Supported Engine Models
Cummins: KT38-M, KTA38-M, KTA38-M3, VTA-1710-M1Fiat-Iveco: 8291 SRM12, 8291 SRM75, 8291SRM85, VECTOR 30, VECTOR 40
MAN: D2862 LE421, V10-1100CRM, V12-1360, V12-1550
MTU: 10V 2000 M72 to M94, 12V 183 TE72 to TE94, 12V 2000 M60 to M94, 8V 2000 M72 to M93
Perkins: 8HD400, Condor M600Ti, Condor M700Ti, Condor M800Ti, CV12 M800Ti
Download IFV136XHD-24S Data Sheet
Download Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 600 - 1200 | 1320 - 2640 |
| Base Foot Print (LxW) | 240 x 140 | 9.45 x 5.51 |
| Base Bolt Centers (C) | 182 | 7.17 |
| Base Bolt Diameter (D) | 16 | 5/8 |
| Base Thickness (T) | 30 | 1.18 |
| Stud Diameter (S) | 24 | M24 (1" approx) |
| Min Free Height (J) | 134 | 5.28 |
| Overall Height (H) | 215 | 8.46 |
| Weight | 4.3 | 9.5 |
