Isoflex IFV130HD-20S Engine Mount for Volvo, Fiat-Iveco and Many Other Marine Engines

Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.

• Stud size 3/4" (M20)
• 7.17" mounting center (182mm)
• Minimum free height 4.33" (110mm)
• Replaces factory mounts for Volvo, Fiat-Iveco, Perkins-Sabre, Gardner, Doosan, MAN
• Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
• Encapsulated core allows for fine tuning of inverted stiffness
• Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
• Hold-down bolt slots can be rotated to any direction for easier installation
• Fail safe

Replaces Isoflex M130HD-20S mount.

Supported Engine Models

Doosan: L126TI (DE12TIB), MD196T, MD196TI, V158TIH & M, V158TIL

Fiat-Iveco: 8460 SM19, 8460 SRM28, 8460 SRM50, C78 200 (C78 ENS M20), C78 300 (C78 ENT M30), C78 550 (C78 ENT M55), C78ENS-M20, C78ENT-M30, C78ENT-M50, C78ENT-M55, C90 380 (C87ENT M38), C90 620 (C87 ENT M62, CURSOR 13, VECTOR 15

Gardner: DT, LG300H, LG325H, LG350H, LG380H, LG400H, LG420H, LXB, LXB Reman

MAN: D 2848 L, D 2848 LE 401, D 2866 LE 401, D2848LE 403, D2876LE404, R6-800

Perkins: M130C Commercial, M185C Commercial, M215C Commercial, M225TI, M225TI + TD MG5050SC, M225TI+ZF HURTH HSW630A, M265TI, M265TI + ZF IRM 220A, M300TI, M300TI + ZF IRM 220A, M350C Commericial, M370Ti

Scania: DI12, DI9

Volvo: D6-280, D6-280DP, D6-310, D6-310DPR, D6-330, D6-330DP, D6-370, D6-370DP, D6-435, D9-500, D9-575, TAMD61A, TAMD61P, TAMD63L, TAMD63P, TAMD71B, TAMD72, TAMD72WJ(jetdrive), TAMD75P

Download IFV130HD-20S Data Sheet

Download Data Sheet