IFV127XHD-20S Engine Mount for Volvo Marine Engines
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size 3/4" (M20)
- 7.17" mounting center (182mm)
- Minimum free height 5.28" (134mm)
- Replaces factory mounts for Volvo marine engines
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Hold-down bolt slots can be rotated to any direction for easier installation
- Fail safe
Supported Engine Models
Volvo: D11-670, D12-675, D12-715, D12-800, D13-800Download IFV127XHD-20S Data Sheet
Download Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 150 - 850 | 330 - 1870 |
| Base Foot Print (LxW) | 230 x 110 | 9.06 x 4.33 |
| Base Bolt Centers (C) | 182 | 7.17 |
| Base Bolt Diameter (D) | 16 | 5/8 |
| Base Thickness (T) | 30 | 1.18 |
| Stud Diameter (S) | 20 | M20 (3/4" approx) |
| Min Free Height (J) | 134 | 5.28 |
| Overall Height (H) | 195 | 7.68 |
| Weight | 3.5 | 7.7 |
