Isoflex IFV125XHD-24S Engine Mount for Caterpillar Marine Engines
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size 1" (M24)
- 6.69" mounting center (170mm)
- Minimum free height 5.28" (134mm)
- Replaces factory mounts for Caterpillar
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Hold-down bolt slots can be rotated to any direction for easier installation
- Fail safe
Replaces Isoflex M125XHD-24S mount.
Supported Engine Models
Caterpillar: 3406B-TA, 3406C-Compact, 3406C-T, 3406C-TA, 3406E, 3406E-TA, 3408-TA, 3408B-TA, 3408C-TA, 3408C-TTA, C15, C15 ACERT, C18, C18 ACERTDownload IFV125XHD-24S Data Sheet
Download Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 150 - 850 | 330 - 1870 |
| Base Foot Print (LxW) | 230 x 110 | 9.06 x 4.33 |
| Base Bolt Centers (C) | 170 | 6.69 |
| Base Bolt Diameter (D) | 16 | 5/8 |
| Base Thickness (T) | 30 | 1.18 |
| Stud Diameter (S) | 24 | M24 (1" approx) |
| Min Free Height (J) | 134 | 5.28 |
| Overall Height (H) | 225 | 8.86 |
| Weight | 3.7 | 8.1 |
