Isoflex IFV115HD-20S Engine Mount
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size M20 (3/4")
- 182mm base bolt centers (7.17")
- Minimum free height 120mm (4.72")
- Replaces factory mounts for Volvo D4 and D6 Engines
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Fail safe
Supported Engine Models
Volvo: D4-180, D4-225, D4-225DP, D4-260, D4-260DP, D4-300, D4-300DPR, D6-280, D6-280DP, D6-310, D6-310DPR, D6-330, D6-330DP, D6-370, D6-370DP, D6-435Download IFV115HD-20S Data Sheet
Contact Us for Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 50 - 350 | 110 - 770 |
| Base Foot Print (LxW) | 230 x 110 | 9.06 x 4.33 |
| Base Bolt Centers (C) | 182 | 7.17 |
| Base Bolt Diameter (D) | 16 | 5/8 |
| Base Thickness (T) | 25 | 1.18 |
| Stud Diameter (S) | M20 | M20 (3/4" approx) |
| Min Free Height (J) | 120 | 4.72 |
| Overall Height (H) | 170 | 6.69 |
| Weight | 3.0 | 6.6 |
