Isoflex IFV100-20S Engine Mount for Fiat-Iveco Marine Engines
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size 3/4" (M20)
- 5.51" mounting center (140mm)
- Minimum free height 3.94" (100mm)
- Replaces factory mounts for Fiat-Iveco
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Hold-down bolt slots can be rotated to any direction for easier installation
- Fail safe
Replaces Isoflex M100-20S mount.
Supported Engine Models
Fiat-Iveco: 8210 M22, 8210 SRM36Download IFV100-20S Data Sheet
Download Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 50 - 350 | 110 - 770 |
| Base Foot Print (LxW) | 188 x 100 | 7.40 x 3.94 |
| Base Bolt Centers (C) | 140 | 5.51 |
| Base Bolt Diameter (D) | 12 | 1/2 |
| Base Thickness (T) | 25 | 0.98 |
| Stud Diameter (S) | 20 | M20 (3/4" approx) |
| Min Free Height (J) | 100 | 3.94 |
| Overall Height (H) | 170 | 6.69 |
| Weight | 2.2 | 4.8 |
